GE AKTApure, User Manual, Page: 214 / 522

Action Step
In the New Method dialog: 2
• select a System
• select a Predefined Method
• click OK
Result: The Method Outline pane shows the included phases for the chosen method and
the Phase Properties pane shows the default settings for the currently highlighted phase.
See UNICORN Method Manual for more information about methods and method creation in UNICORN.
Sample loop is called capillary loop in UNICORN.
Note:
Text Instruction mode
In most cases methods can be edited using the Phase Properties pane in the Method Editor module.
However, modules without a recommended position are not supported by Phase Properties and have
to be edited in the Text Instruction mode.
The following modules require that the method is created using the Text Instruction mode:
• Inlet valve IX
When using Inlet valve IX (V9-IX or V9H-IX) connected to another inlet valve in a run, it is
necessary to use the instructions for both Inlet valve IX and the other inlet valve, respectively.
Note:
214 ÄKTA pure User Manual 29119969 AB
5 Operation
5.9 Create a method and perform a run
5.9.1 Create a method