Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
7
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
DISPLAYING THE DME INFORMATION WINDOW
1)
Press the
PFD Opt
Softkey.
2)
Press the
DME
Softkey to display the DME Information Window above the
BRG1 Information Window.
3)
To remove the DME Information Window, press the
DME
Softkey again.
USING THE GENERIC TIMER
1)
Press the
TMR/REF
Softkey.
2)
Turn the large
FMS
Knob to select the timer field (HH:MM:SS).
3)
Use the
FMS
Knob to enter the desired time.
4)
Press the
ENT
Key. The Up/Dn field is now highlighted.
5)
Turn the small
FMS
Knob to display the Up/Dn Window.
6)
Turn the small
FMS
Knob to select ‘Up’ or ‘Dn’.
7)
Press the
ENT
Key. ‘Start?’ is now highlighted.
8)
Press the
ENT
Key to start the timer. The field changes to ‘Stop?’. If the
timer is counting down, it will start counting up after reaching zero.
9)
To stop the timer, press the
ENT
Key with ‘Stop?’ highlighted. The field
changes to ‘Reset?’.
10)
To reset the timer, press the
ENT
Key with ‘Reset?’ highlighted. The field
changes back to ‘Start?’ and the digits are reset.
11)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
CHANGING THE TEMPERATURE DISPLAY UNITS
1)
Select the ‘Aux - System Setup 1’ Page.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight the Temperature units field.
4)
Turn the small
FMS
Knob to highlight ‘CelsiusºC’ or ‘Fahrenheit(ºF) and
press the
ENT
Key.
5)
Press the
FMS
Knob to deactivate the cursor.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......