Garmin G1000 NXi, Reference Manual

Page: 227 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
201
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
MFD1 DB ERR
– MFD1 obstacle
database error exists.
The MFD detected a failure in the obstacle
database. Ensure the data card is properly
inserted. Replace data card. If problem
persists, the system should be serviced.
MFD1 DB ERR
– MFD1 obstacle
database missing.
The obstacle database is present on another
LRU, but is missing on the specified LRU.
MFD1 DB ERR
– MFD1 terrain
database error exists.
The MFD detected a failure in the terrain
database. Ensure the terrain card is properly
inserted in display. Replace terrain card. If
problem persists, the system should be serviced.
MFD1 DB ERR
– MFD1 terrain
database missing.
The terrain database is present on another LRU,
but is missing on the specified LRU.
MFD1 SERVICE
– MFD1 needs service.
Return unit for repair.
The MFD self-test has detected a problem. The
system should be serviced.
MFD1 KEYSTK – MFD1 [key name] is
stuck.
A key is stuck on the MFD bezel. Attempt to
free the stuck key by pressing it several times.
The system should be serviced if the problem
persists.
MFD1 VOLTAGE
– MFD1 has low
voltage. Reducing power usage
The MFD voltage is low. The system should be
serviced.
NAV #[1-2] INOP - CAL
– Check NAV
calibration.
NAV 1 and/or NAV 2 calibration version error.
Check NAV calibration.
NAV #[1-2] INOP - CONFIG – Check
NAV Software and Config.
The NAV1 and/or NAV2 configuration settings
do not match backup configuration memory.
The system should be serviced
NAV #[1-2] INOP - SERL – Check NAV
Serial Communication.
The NAV1 and/or NAV2 communication is
inoperative. They system should be serviced.
NAV #[1-2] INOP - INTRL – NAV
internal fault.
NAV1 and/or NAV2 has an internal fault.
NAV #[1-2] INOP - SYNTH
– NAV
synthesizer lock fault.
The NAV1 and/or NAV2 has a synthesizer lock
fault.
NAV1 MANIFEST – NAV1 software
mismatch, communication halted.
NAV1 software mismatch. The system should
be serviced.