Garmin G1000 NXi, Reference Manual

Page: 85 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
59
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
b)
Use the
FMS
Knob or the waypoint submenu to enter the identifier,
facility, or city name of the origin waypoint.
c)
Press the
ENT
Key. The ‘Set Runway’ Window is displayed with the
‘Runway’ Field highlighted.
d)
Turn the small
FMS
Knob to select the runway.
e)
Press the
ENT
Key to add the origin airport/runway to the flight plan.
5) Select the destination airport and runway by highlighting the field below
the Destination header and completing steps 4b - 4e.
6) Select the enroute waypoints.
a) Highlight the location to insert the waypoint using the FMS Knob (If
the enroute header is selected, the new waypoint is placed following
the header. If an enroute waypoint or the dashes are selected, the new
waypoint will be placed ahead of the selected item.)
b)
Use the
FMS
Knob or the waypoint submenu to enter the identifier,
facility, or city name of the waypoint.
c)
Press the
ENT
Key. The stored flight plan is modified as each waypoint
is entered.
7)
Repeat step number 6 to enter each additional enroute waypoint.
8) When all waypoints have been entered, press the FMS Knob to deactivate
the cursor.
ADDING A WAYPOINT TO THE ACTIVE FLIGHT PLAN
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3)
Select the point in the flight plan before which to add the new waypoint.
The new waypoint is placed directly in front of the highlighted waypoint.
4)
Turn the small
FMS
Knob to display the ‘Waypoint Information’ Window.
(Turning it clockwise displays a blank ‘Waypoint Information’ Window,
turning it counter-clockwise displays the ‘Waypoint Information’ Window
with a waypoint selection submenu allowing selection of active flight plan,
nearest, recent, user, or airway waypoints).
5)
Enter the identifier, facility, or city name of the waypoint or select a
waypoint from the submenu of waypoints and press the
ENT
Key. The
active flight plan is modified as each waypoint is entered.