Garmin G1000 NXi, Reference Manual

Page: 229 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
203
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
PFD1 DB ERR
– PFD1 terrain database
error exists.
The PFD detected a failure in the terrain
database. Ensure the terrain card is properly
inserted in display. Replace terrain card. If
problem persists, the system should be serviced.
PFD1 DB ERR
– PFD1 terrain database
missing.
The terrain database is present on another LRU,
but is missing on the specified LRU.
PFD1 KEYSTK
– PFD1 [key name] is
stuck.
A key is stuck on the PFD bezel. Attempt to
free the stuck key by pressing it several times.
The system should be serviced if the problem
persists.
[PFD1 or MFD1] CARD 1 REM
– Card
1 was removed. Reinsert card.
The SD card was removed from the top card slot
of the specified PFD or MFD. The SD card needs
to be reinserted.
[PFD1 or MFD1] CARD 2 REM
– Card
2 was removed. Reinsert card.
The SD card was removed from the bottom card
slot of the specified PFD or MFD. The SD card
needs to be reinserted.
[PFD1 or MFD1] CARD 1 ERR
– Card
1 is invalid.
The SD card in the top card slot of the specified
PFD or MFD contains invalid data.
[PFD1 or MFD1] CARD 2 ERR
– Card
2 is invalid.
The SD card in the bottom card slot of the
specified PFD or MFD contains invalid data.
PFD1 VOLTAGE
– PFD1 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be
serviced.
PFD1 KEYSTK – PFD2 [key name] is
stuck.
A key is stuck on the PFD bezel. Attempt to
free the stuck key by pressing it several times.
The system should be serviced if the problem
persists.
PFD1 SERVICE
– PFD1 needs service.
Return unit for repair.
The PFD self-test has detected a problem. The
system should be serviced.
PFD1 TERRAIN DSP – PFD1 Terrain
awareness display unavailable.
One of the terrain or obstacle databases
required for TAWS in PFD1 is missing or invalid.
PFD1 VOLTAGE – PFD2 has low
voltage. Reducing power usage
The PFD2 voltage is low. The system should be
serviced.
PTK FAIL
– Parallel track unavailable:
invalid leg type.
Invalid leg type for parallel offset.