background image

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III

190-02178-02  Rev. A 

60

Flight Management

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

Flight

 

Management

Hazar

d

Avoidance

AFCS

Additional

Featur

es

Abnormal

Oper

ation

Annun/Alerts

Appendix

Index

CREATING AND ADDING USER WAYPOINTS TO THE ACTIVE FLIGHT PLAN 

USING THE MAP POINTER

1) 

Press the 

FPL

 Key

2) 

Press the 

FMS

 Knob on the MFD to activate the cursor.

3) 

Select the point in the flight plan to add the new waypoint.

4) 

Push the 

Joystick

 on the MFD to activate the panning function on the ‘FPL 

- Active Flight Plan’ Page and pan to the map location of the desired user 
waypoint.

5) 

Press the 

LD WPT

 Softkey; or press the 

MENU

 Key, select ‘Load Waypoint’, and press 

the 

ENT

 Key. The user waypoint is created with a name of USRxxx (using the next 

available in sequence) and is added to the active flight plan.

ADDING A WAYPOINT TO AN EXISTING STORED FLIGHT PLAN

1) 

On the ‘FPL - Flight Plan Catalog’ Page, press the 

FMS

 Knob to activate the 

cursor.

2) 

Highlight the desired flight plan.

3) 

Press the 

EDIT

 Softkey; or press the 

ENT

 Key, turn the large 

FMS

 Knob 

clockwise to select “EDIT” and press the 

ENT

 Key.  The ‘FPL - Stored Flight 

Plan’ Page is displayed.

4) 

Select the point in the flight plan to add the new waypoint.  The new 
waypoint is placed directly in front of the highlighted waypoint.

5) 

Turn the small 

FMS

 Knob to display the ‘Waypoint Information’ Window. 

(Turning it clockwise displays a blank ‘Waypoint Information’ Window, 
turning it counter-clockwise displays the ‘Waypoint Information’ Window 
with a waypoint selection submenu allowing selection of active flight plan, 
nearest, recent, user, or airway waypoints).

6) 

Enter the identifier, facility, or city name of the waypoint or select a 
waypoint from the submenu of waypoints and press the 

ENT

 Key.  The new 

waypoint now exists in the flight plan.

REMOVING AN INDIVIDUAL WAYPOINT FROM THE ACTIVE FLIGHT PLAN

1) 

Press the 

FPL 

Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the 

‘Flight Plan’ Window (PFD).

2) 

Press the 

FMS 

Knob to activate the cursor (not required on the PFD) and 

turn the large 

FMS

 Knob to highlight the waypoint to be removed.

Summary of Contents for G1000 NXi





































































































































































































































































Reviews: