Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
Appendix
220
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Updating Databases:
1)
With the system OFF, remove an SD Card from the bottom SD card slot of the
MFD.
2)
Download and
install the databases on an SD card.
3)
Put the SD Card in the bottom SD card slot of the MFD.
4)
Turn the system ON.
5)
Press the
ENT
Key or the right-most softkey on MFD display to
acknowledge the startup screen.
6)
Turn the large
FMS
Knob and select Aux.
7)
Turn the small
FMS
Knob and select Databases.
8)
Monitor the Sync Status on the ‘Aux-Databases’ Page. Wait for all
databases to complete syncing, indicated by ‘Sync Complete’ being
displayed. A cyan double-arrow will appear between the Standby and
Active columns to show which Standby databases will be transferred to
Active at the next power cycle.
9)
Verify the correct database cycle information is shown in the Standby
column.
10)
Remove power from the system.
11)
Remove the SD card from the bottom slot of the MFD if desired.
12)
Apply power to the system.
13)
Press the
ENT
Key or the right-most softkey on MFD display to
acknowledge the startup screen.
14)
Turn the large
FMS
Knob and select Aux
.
15)
Turn the small
FMS
Knob and select the Databases.
16)
Verify the standby databases transferred and are now in the Active column.
17)
To manually activate any databases that did not transfer to the active
column:
a)
Push the
FMS
Knob. The first database title on the screen will be
selected.
b)
Turn the small
FMS
Knob as necessary to select the database title.
c)
Press the
ENT
Key. A cyan double-sided arrow will appear indicating
the standby database will become active.
Or
:
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......
