Garmin G1000 NXi, Reference Manual, Page: 139 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
113
Hazard Avoidance
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
METARs and TAFs
Displaying METAR and TAF text on the MFD:
1) On the ‘Map - Weather Data Link (XM or FIS-B or CNXT)’ Page, press the
METAR
Softkey.
2) Press the Joystick and pan to the desired airport.
3) Press the ENT Key. The Weather Information Page is shown with METAR
and TAF text.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF
text. METAR text must be completely scrolled through before scrolling
through the TAF text.
5) Press the FMS Knob or the CLR Key to return to the Weather Data Link
Page.
Or :
1) Select the Weather Information Page.
a) Turn the large FMS Knob to select the Waypoint Page Group.
b)
Press the
WX
Softkey to select the Weather Information Page.
2)
Press the
FMS
Knob to display the cursor.
3)
Use the FMS Knob to enter the desired airport and press the
ENT
Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF
text. Note that the METAR text must be completely scrolled through before
scrolling through the TAF text.
Displaying original METAR text on the Active Flight Plan Page:
1) Select the ‘FPL - Active Flight Plan’ Page on the MFD.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight a waypoint with an available METAR
(indicated with a METAR flag next to it). The METAR text will appear in the
‘Selected Waypoint Weather’ Window below.
4)
When finished, press the
FMS
Knob to remove the cursor or press the
FPL
Key to exit the Active Flight Plan Page.