Garmin G1000 NXi, Reference Manual

Page: 74 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
48
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
If the ‘NRST - Nearest VOR’ Page is displayed, to display the flashing cursor:
Press the
VOR
Softkey.
Or :
a) Press the MENU Key
b)
Highlight ‘Select VOR Window’, and press the
ENT
Key.
4)
If needed, press the
ENT
Key or turn either
FMS
Knob as needed to select
an identifier.
5)
Press the
FMS
Knob to remove the flashing cursor.
CREATING USER WAYPOINTS FROM THE ‘WPT - USER WPT INFORMATION’
PAGE
1) Press the New Softkey, or press the MENU Key and select ‘Create New
User Waypoint’.
2) Enter a user waypoint name (up to six characters).
3) Press the ENT Key. The current aircraft position is the default location of
the new waypoint.
4) If desired, define the type and location of the waypoint in one of the
following ways:
Select “RAD/RAD” using the small FMS Knob, press the ENT Key,
and enter the two reference waypoint identifiers and radials into the
‘Reference Waypoints’ Window using the
FMS
Knobs.
Or :
Select “RAD/DIS” using the small FMS Knob, press the ENT Key, and
enter the reference waypoint identifier, the radial, and the distance into
the ‘Reference Waypoints’ Window using the
FMS
Knobs.
Or :
Select “LAT/LON” using the small FMS Knob, press the ENT Key, and
enter the latitude and longitude into the ‘Information’ Window using
the
FMS
Knobs.
5) Press the ENT Key to accept the new waypoint.
6) If desired, change the storage method of the waypoint to temporary or
normal by moving the cursor to “Temporary” and pressing the
ENT Key to
check or uncheck the box.
7) Press the FMS Knob to remove the flashing cursor.