Garmin G1000 NXi, Reference Manual

Page: 232 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
206
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
VNV
– Unavailable. Unsupported leg
type in flight plan.
The lateral flight plan contains a procedure
turn, vector, or other unsupported leg type prior
to the active vertical waypoint. This prevents
vertical guidance to the active vertical waypoint.
WPT ARRIVAL
– Arriving at waypoint
-[xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
XPDR1 ADS-B 1090
– Datalinik:
ADS-B 1090 receiver has failed.
A failure has been detected in the 1090
receiver.
XPDR1 ADS-B FAIL – Transponder:
XPDR1 is unable to transmit ADS-B
messages.
ADS-B is inoperative. The transponder may
not be receiving a valid GPS position. Other
transponder functions may be available. Service
when possible.
XPDR1 ADS-B NO POS
– Transponder:
ADS-B is not transmitting position.
The transponder is not able to receive position
information.
XPDR1 ADS-B TRFC – Transponder:
ADS-B traffic has failed
The Transponder is incapable of processing
traffic information.
XPDR1 ADS-B UAT – Datalink: ADS-B
in UAT receiver has failed.
A failure has been detected in the UAT receiver.
XPDR1 CONFIG – XPDR1 config error.
Config service req’d.
The transponder configuration settings do not
match those of backup configuration memory.
The system should be serviced.
XPDR1 CSA FAIL – Traffic: ADS-B In
traffic alerting has failed.
ADS-B Conflict Situational Awareness (CSA) is
unavailable.