Garmin G1000 NXi, Reference Manual

Page: 31 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
5
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
CHANGE NAVIGATION SOURCES
1)
Press the
CDI
Softkey to change from GPS to VOR1 or LOC1. This places
the cyan tuning box over the NAV1 standby frequency in the upper left
corner of the PFD.
2)
Press the
CDI
Softkey again to change to VOR2 or LOC2. This places the
cyan tuning box over the NAV2 standby frequency.
3)
Press the
CDI
Softkey a third time to return to GPS.
ENABLING/DISABLING THE HSI MAP ON THE PFD
1) Press the Map/HSI Softkey.
2)
Press the
Layout
Softkey.
3)
Press the
HSI Map
Softkey to enable the HSI Map.
Or
:
Press the Map Off Softkey to disable the HSI Map.
4) Press the Back Softkey twice to return to the top-level PFD Softkeys.
ADJUSTING THE SELECTED HEADING
Turn the HDG Knob to set the Selected Heading.
Press the HDG Knob to synchronize the bug to the current heading.
ADJUSTING THE SELECTED COURSE
Turn the CRS Knob to set the Selected Course.
Press the CRS Knob to re-center the CDI and return the course pointer to
the bearing of the active waypoint or navigation station.
CHANGING THE NAVIGATION ANGLE TRUE/MAGNETIC SETTING
1)
Use the FMS Knob to select the ‘Aux - System Setup 1’ Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the NAV Angle setting in the ‘Display
Units’ box.