Garmin G1000 NXi, Reference Manual

Page: 63 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
37
Nav/Com/XPDR/Audio Panel
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
3)
Turn the large
FMS
Knob to highlight the ‘Pilot L-R Swap’ or ‘Copilot L-R
Swap’ ‘On/ Off’ Field in the Audio Box.
4)
Turn the small
FMS
Knob clockwise to turn the Swap On or counterclockwise
to turn Off.
BLUE-SELECT MODE (TELEPHONE/ENTERTAINMENT DISTRIBUTION) (GMA
1360)
The music and telephone ( TEL , MUS1 , and MUS2 ) audio are distributed using
the Blue-Select Mode.
The Blue-Select Mode is entered by pressing the small knob when the volume
control cursor (flashing white annunciator) is not active. If the volume control cursor
is active, press the small knob twice. The first press will cancel the volume control
cursor, the second will activate Blue-Select Mode.
The annunciator over the TEL Button will be flashing blue. Any combination of
the annunciators over the PILOT ICS , COPLT ICS , and PASS ICS buttons may be
blue. Select the desired button to turn the blue annunciator on or off to distribute the
telephone audio to selected crew/passenger positions. Turn the large knob to select
MUS1 or MUS2 , and select the crew/passenger positions to receive the music audio.
Selecting any button other than PILOT ICS, COPLT ICS, PASS ICS, TEL,MUS1,
or MUS2 will cancel Blue-Select Mode. Pressing the small knob will also cancel Blue-
Select Mode. After approximately ten seconds with no input, the Blue-Select Mode will
automatically cancel.
BLUETOOTH
®
(GMA 1360)
NOTE:
Pairing is only necessary during the first attempt to connect a Bluetooth
device to the audio panel. Once paired, the audio panel and the device will
connect automatically.
Pairing a Bluetooth Device With The Audio Panel
Press and hold the inner knob for two seconds. The Bluetooth Annunciator flashes
to indicate the unit is discoverable and the aural message “ Bluetooth discoverable ”
is heard. The audio panel will remain discoverable for 90 seconds or until a successful
pair is established. Once paired, the Bluetooth Annunciator turns steady blue and the
aural message “
Bluetooth paired ” is heard.