Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
2
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
SETTING THE SELECTED ALTITUDE
Turn the
ALT
Knob to set the Selected Altitude. Turn the large knob
for 1000-ft increments, small knob for 100-ft increments. If set to
Metric mode, the large knob adjusts the Selected Altitude in 500-meter
increments; the small knob adjusts the Selected Altitude in 50-meter
increments..
If a Minimum Descent Altitude/Decision Height (MDA/DH) value has been set, this
altitude is also available for the Selected Altitude while turning the
ALT
Knob.
ENABLING ALTITUDE UNITS OVERLAYS
1)
Press the
PFD Opt
Softkey to display the second-level softkeys.
2)
Press the
ALT
Units
Softkey.
3)
Press the
Meters
or
Feet
Softkey to enable/disable the altitude overlays .
4)
Press the
Back
Softkey twice to return to the top-level softkeys.
SELECTING THE ALTIMETER BAROMETRIC PRESSURE SETTING
Turn the
BARO
Knob to select the desired setting.
SELECTING STANDARD BAROMETRIC PRESSURE (29.92 IN HG)
1)
Press the
PFD Opt
Softkey.
2)
Press the
STD Baro
Softkey to set standard barometric pressure.
CHANGE ALTIMETER BAROMETRIC PRESSURE SETTING UNITS
1)
Press the
PFD Opt
Softkey to display the second-level softkeys.
2)
Press the
ALT Units
Softkey.
3)
Press the
IN
Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or:
Press the
HPA
Softkey to display the barometric pressure setting in
hectopascals.
4)
Press the
Back
Softkey twice to return to the top-level softkeys.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......