Garmin G1000 NXi, Reference Manual

Page: 52 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
26
Engine Indication System
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
LEAN ENGINE PAGE
Exhaust Gas Temperatures (Lean Assist)
Exhaust Gas
Temperature
Peak
Lean of Peak
Indicator
Accessing the EIS Lean Display:
1) On the MFD, press the Engine Softkey.
2) Press the Engine softkey.
3) Press the Lean softkey.
From the Lean Page, the
CYL SLCT
and
Assist
Softkeys can be utilized to obtain
information about specific cylinders on both the EGT and CHT graphs. Pressing the
CYL SLCT Softkey cycles through the cylinders; the selected cylinder number is dis-
played in cyan. The CYL SLCT Softkey is disabled during warning or caution condi-
tions or when the ASSIST Softkey is pressed.
Monitoring the desired cylinder’s EGT and CHT:
From the Lean Page, press the CYL SLCT Softkey to cycle through each
cylinder and view its EGT and CHT. The selected cylinder is shown in cyan.
When the
ASSIST
Softkey is selected, the system initially highlights and selects
the cylinder number with the hottest EGT and displays its temperature below the EGT
bar graph. A readout showing the difference between peak (
D
PEAK) and the current
temperature for the selected cylinder is displayed the EGT numerical temperature in-
dication.
As the mixture is leaned, a cyan line will appear above each cylinder to indicate
EGT peak. Refer to the POH and AFM for the recommended mixture adjustment
procedures.