Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
3
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
SETTING THE BARO QFE
Setting BARO QFE while on the ground:
1)
Set the appropriate QFE BARO setting on the PFD.
2)
Use the
FMS
Knob to select the ‘Aux - System Setup 1’ Page on the MFD.
3)
Push the
FMS
Knob to activate the cursor.
4)
Turn the large
FMS
Knob to select the ‘REF’ field in the ‘BARO QFE’ Box.
5)
Use the small
FMS
Knob to select ‘Manual’ or ‘FMS ORIG’, and press the
ENT
Key to accept.
6)
If ‘Manual’ was selected, use the
FMS
Knobs to enter the field elevation of
the departure airport in the ‘ELEV’ field and press the
ENT
Key.
7)
If ‘FMS ORIG’ was selected, the field elevation of the selected departure
airport/runway from the flight plan will be shown in the ‘BARO QFE’ Box.
Verify this information is correct.
8)
The ‘On/Off’ Field will automatically highlight, turn the small
FMS
Knob to
change the selection from ‘Off’ to ‘On’.
9)
Push the
FMS
Knob to deactivate the cursor. QFE mode is now active.
Change the BARO setting to STD BARO to disable BARO QFE.
Setting BARO QFE while in flight:
1)
Set the BARO setting to STD BARO on the PFD.
2)
Use the
FMS
Knob to select the ‘Aux - System Setup 1’ Page on the MFD.
3)
Push the
FMS
Knob to activate the cursor.
4)
Turn the large
FMS
Knob to select the ‘REF’ field in the BARO QFE Box.
5)
Use the small
FMS
Knob to select ‘Manual’ or ‘FMS DEST’, and press the
ENT
Key to accept.
6)
If ‘Manual’ was selected, use the
FMS
Knobs to enter the field elevation of
the destination airport in the ‘ELEV’ field and press the
ENT
Key.
7)
If ‘FMS DEST’ was selected, the field elevation of the selected destination
airport/runway from the flight plan will be shown in the BARO QFE Box.
Verify this information is correct.
8)
The ‘On/Off’ Field will automatically highlight, turn the small
FMS
Knob to
change the selection from ‘Off’ to ‘On’.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......
