Garmin G1000 NXi, Reference Manual

Page: 252 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
Appendix
226
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
20)
To manually activate any databases that did not transfer to the active
column:
a)
Press the
FMS
Knob. The first database title on the screen will be
selected.
b)
Turn the small
FMS
Knob as necessary to select the database title.
c)
Verify the correct database cycle information is shown for each
database for each display.
Or
:
Press the Menu Key and select ‘Swap Stby/Actv’ using the small FMS
Knob. Press the
ENT
Key. A cyan double-sided arrow will appear
indicating that the standby database will become active.
d)
Remove and reapply power to the system.
e) Press the ENT Key or the right-most softkey on MFD display to
acknowledge the startup screen.
f)
Turn the large
FMS
Knob and select Aux
.
g) Turn the small FMS Knob and select Databases.
h) Verify that the standby databases transferred and are now in the Active
column.
21)
For additional information on each database, press and then turn the
FMS
Knob to select the database, and then press the Details Softkey. Press the
ENT Key or the FMS Knob to exit.
Or:
Press the
Menu
Key and select ‘Details’ using the small
FMS
Knob and press
the ENT Key. Press the ENT Key or the FMS Knob to exit.
22) To view database information for an individual display:
a) Turn the large FMS Knob and select Aux.
b)
Turn the small
FMS
Knob and select System Status.
c)
Press the
ENT
Key. A cyan double-sided arrow will appear indicating
that the standby database will become active.
d)
Press the Display Database Selection Softkey (MFD1 DB, PFD1 DB, PFD2
DB) to show database information for each display. Use the small
FMS
Knob to scroll through the database information. Press the ENT Key or
the FMS Knob to exit.