![Garmin G1000 NXi Reference Manual Download Page 248](http://html1.mh-extra.com/html/garmin/g1000-nxi/g1000-nxi_reference-manual_3624164248.webp)
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
Appendix
222
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Once a connection to the paired mobile device is made, Garmin Pilot makes avail-
able databases that can be transferred to the Wireless Transceiver. If any of these data-
bases is more recent than the respective standby database on the system, (or if there is
no standby database on the system) those databases will be automatically selected to
load. The database updates may be initiated from the ‘Aux - Databases’ Page, or from
other pages on the MFD.
NOTE:
The system will only provide a WiFi connection if new databases have
been detected for download on Garmin Pilot via a valid Bluetooth connection.
If there are no database updates required the system will not provide a WiFi
signal.
NOTE:
If the mobile device has previously connected to the FS510, and is
not connected to another WiFi source, the mobile device should connect
automatically to the FS510. If the mobile device is connected to another WiFi
source (i.e. hangar wifi), then the FS510 will not connect automatically.
Updating Databases from any MFD page (except the “Aux- Databases’
Page):
1)
Insert the Wireless Transceiver SD Card in the bottom slot of the MFD if not
already inserted.
2)
Turn the system ON.
3)
Press the
ENT
Key or the right-most softkey on MFD display to
acknowledge the startup screen.
4)
On the mobile device, start Garmin Pilot and touch
Home > Connext >
Database Concierge.
5)
Turn the large
FMS
Knob and select Aux
.
6)
Turn the small
FMS
Knob and select the Connext Setup.
7)
Ensure that Wifi Database Import is enabled in the ‘Device’ Window (refer
to Additional Features section for instructions to enable Wifi Database
Import).
8)
Verify that the mobile device is enabled via Bluetooth in the Bluetooth
settings on the mobile device.
9)
In the ‘Paired Devices’ Window on the ‘Connext Setup’ Page, ensure the
system is paired with the mobile device in use. (refer to Additional Features
for instructions on connection to a preferred device).
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......