Garmin G1000 NXi, Reference Manual

Page: 117 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
91
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
a)
If necessary, push the
FMS
Knob to exit the approach list, and use the
large
FMS
Knob to move the cursor to the Approach ‘Channel’ Field.
b)
Use the
FMS
Knob to enter the approach channel number, and press
the
ENT
Key to accept the approach channel number. The airport and
approach are selected.
5)
Select a transition for the selected approach. Press the
ENT
Key.
6)
Press the
ENT
Key to load the selected approach procedure.
ACTIVATING A PREVIOUSLY LOADED APPROACH
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed with ‘Activate
Approach’ highlighted.
2)
Press the
ENT
Key to activate the approach.
ACTIVATING A PREVIOUSLY LOADED APPROACH WITH VECTORS TO FINAL
1) Press the PROC Key to display the ‘Procedures’ Window.
2)
Highlight ‘Activate Vector-to-Final’ and press the
ENT
Key.
LOADING AND ACTIVATING AN APPROACH USING THE MENU KEY
1) Press the PROC Key.
2)
Use the large
FMS
Knob to highlight ‘Select Approach’ and press the
ENT
Key.
3)
From the ‘PROC - Approach Loading’ Page, press the
MENU
Key on
the MFD. The ‘Page Menu’ Window is displayed with ‘Load & Activate
Approach’ highlighted.
4) Press the ENT Key.
When GPS is not approved for the selected final approach course, the
message ‘- NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach?’ is displayed. With ‘Yes’ highlighted, press the
ENT Key.
When a visual approach is selected, the message ‘Obstacle clearance is not
provided for visual approaches’ is displayed. With ‘OK’ highlighted, press
the
ENT
Key.