Garmin G1000 NXi, Reference Manual

Page: 111 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
85
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
5)
Highlight and remove the departure:
a)
Turn the large
FMS
Knob to highlight the white header of the
departure.
b)
Press the
CLR
Key. The ‘Remove <procedure name> from flight plan?’
window is displayed.
Or
:
a) Press the MENU Key to display the ‘Page Menu’ Window and turn the
FMS
Knob to highlight ‘Remove Departure’.
b) Press the ENT Key. The ‘Remove <procedure name> from flight plan?’
window is displayed.
6) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the
CLR
Key, or highlight ‘CANCEL’ and press the
ENT
Key.
7) Press the FMS Knob to remove the flashing cursor.
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN USING THE PROC KEY
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2) Highlight ‘Select Arrival’.
3) Press the ENT Key. The ‘PROC - Arrival Loading’ Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select an arrival from the list and press the
ENT
Key.
6)
Select a transition (if required) and press the
ENT
Key.
7) Select a runway (if required) and press the ENT Key. ‘Load?’ is highlighted.
8) Press the ENT Key to load the arrival procedure
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN FROM THE ‘WPT -
ARRIVAL INFORMATION’ PAGE
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group),
press the
STAR
Softkey. The ‘WPT - Arrival Information’ Page is displayed,
defaulting to the airport displayed on the ‘WPT - Airport Information’ Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.