Garmin G1000 NXi, Reference Manual

Page: 230 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
204
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
PTK FAIL
– Parallel track unavailable:
past IAF.
IAF waypoint for parallel offset has been
passed.
PTK FAIL – Parallel track unavailable:
bad geometry.
Bad parallel track geometry.
SCHEDULER [#] – <message>. Message criteria entered by the user.
SLCT FREQ
– Select appropriate
frequency for approach.
The system notifies the pilot to load the
approach frequency for the appropriate NAV
receiver. Select the correct frequency for the
approach.
SLCT MAG
– Select MAGNETIC NAV
ANGLE display units.
The system notifies the pilot to set the Nav
Angle units on the Avionics Settings Screen to
Magnetic.
SLCT NAV – Select NAV on CDI for
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.
SLCT NON-MAG – Select alternate
NAV ANGLE display units.
The system notifies the pilot to set the Nav
Angle units on the Avionics Settings Screen to
True.
STEEP TURN – Steep turn ahead. A steep turn (known as a normal bank turn,
with more than 90 degrees of directional
change) is 15 seconds ahead. Prepare to turn.
STRMSCP FAIL – Stormscope has
failed.
Stormscope has failed. The system should be
serviced.
SURFACEWATCH DISABLED
– Too far
north/south.
The SurfaceWatch system has been disabled.
SURFACEWATCH FAIL
– Invalid audio
configuration.
The SurfaceWatch system has failed due to an
invalid audio configuration.
SURFACEWATCH FAIL
– Invalid
configurable alerts.
The SurfaceWatch system has failed due to
invalid configurable alerts.
SURFACEWATCH FAIL – One or more
inputs invalid.
The SurfaceWatch system has failed due to one
or more invalid inputs.
SURFACEWATCH INHIBITED –
Surfacewatch inhibited.
The SurfaceWatch system has been inhibited.