Fuji Xerox DocuPrint M355 df User Manual Download Page 82

Page: 82 / 428

Printer Connection and Software Installation



Dynamic Methods of Setting the Printer’s IP Address

There are two protocols available for dynamically setting the printer’s IP address:

•

DHCP (enabled by default)

•

AutoIP

You can turn on/off both protocols using the operator panel or CentreWare Internet Services.

NOTE:

•

You can print a report that includes the printer’s IP address. On the operator panel, press the

(

System

) button, select

Report / List

, press the

button, select

System Settings

, and then press the

button. The IP address is listed on

the System Settings page.

Using the Operator Panel

To turn on/off either the DHCP or AutoIP protocol:

On the operator panel, press the

(

System

) button.

Select

Admin Menu

, and then press the

button.

Select

Network Setup

, and then press the

button.

Select

TCP/IP

, and then press the

button.

Select

IPv4

, and then press the

button.

Select

Get IP Address

, and then press the

button.

Select

DHCP / AutoIP

, and then press the

button.

Using CentreWare Internet Services

To turn on/off either the DHCP or AutoIP protocol:

Launch your web browser.

Enter the IP address in the browser’s address field, and then press the

Enter

key.

Select

Properties

Select the

Protocol Settings

folder on the left navigation panel.

Select

TCP/IP

In the

Get IP Address

field, select the

DHCP / Autonet

option.

Click the

Apply

button.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands