manualshive.com logo in svg

Fuji Xerox DocuPrint M355 df, User Manual

Share
Download
Fuji Xerox DocuPrint M355 df User Manual Download Page 382

382

Maintenance

Replacing the Toner Cartridge

Fuji Xerox toner cartridge is available only through Fuji Xerox. 
It is recommended that you use Fuji Xerox toner cartridge for your printer. Fuji Xerox does not provide warranty 
coverage for problems caused by using accessories, parts, or components not supplied by Fuji Xerox.

This section includes:

• "Overview" on page 382
• "Removing the Toner Cartridge" on page 383
• "Installing a Toner Cartridge" on page 384

Overview

When a toner cartridge reaches its usable life-span, the following messages appear on the LCD panel.

*1: This warning appears only when Fuji Xerox toner cartridge is used (

Non-Genuine

 mode is set to off).

*2: When a high capacity toner cartridge is set, the remaining page yield is approx. 2,500 pages. The remaining page yield differs 

depending on printing conditions, contents of the documents, and frequency of turning on/off the printer. For more information, see 
IMPORTANT of 

"Consumables" on page 396

.

IMPORTANT: 

•

When placing a used toner cartridge on the floor or on a table, place a few sheets of paper under the toner cartridge to catch 
any toner that may spill.

•

Do not reuse old toner cartridge once you remove it from the printer. Doing so can impair print quality.

•

Do not shake or pound the used toner cartridge. The remaining toner may spill.

•

We recommend you to use up the toner cartridge within one year after removing it from the packaging.

Message

Remaining Page Yield

Printer Status and Action

Replace Toner Soon
Life Almost Over

*1

1,000 pages

*2

The toner cartridge has become low. Prepare a new 
one.

Out of Toner
Replace 
Toner Cartridge

-

The toner cartridge has become empty. Replace the 
old toner cartridge with a new one.

Summary of Contents for DocuPrint M355 df













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands