manualshive.com logo in svg

Fuji Xerox DocuPrint M355 df, User Manual

Share
Download
Fuji Xerox DocuPrint M355 df User Manual Download Page 261

Using the Operator Panel Menus and Keypad

261

• PS Job Time-Out

Purpose:

To specify the runtime of one PostScript job. The change becomes effective after the printer is turned off and then on 
again.

Values:

• Paper Select Mode

Purpose:

To set the way to select the paper tray for PostScript mode. The change becomes effective after the printer is turned 
off and then on again.

Values:

Network Setup

Use the 

Network Setup

 menu to change the printer settings affecting jobs sent to the printer through the network.

NOTE: 

•

Values marked by an asterisk (*) are the factory default menu settings.

• Ethernet

NOTE: 

•

Ethernet feature is available only when the printer is connected using the wired network.

Purpose:

To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the 
printer is turned off and then on again.

Values:

Off*

Job time-out does not occur.

On

1min

A PostScript error occurs if processing is not completed after the specified 
time.

1-900

Auto*

The tray is selected as the same setting as in the PCL mode.

Select From Tray

The tray is selected in a method compatible with regular PostScript printers.

Auto

*

Detects the Ethernet settings automatically.

10BASE-T Half

Uses 10BASE-T Half-duplex.

10BASE-T Full

Uses 10BASE-T Full-duplex.

100BASE-TX Half

Uses 100BASE-TX Half-duplex.

100BASE-TX Full

Uses 100BASE-TX Full-duplex.

1000BASE-T Full

Uses 1000BASE-T Full-duplex.

Summary of Contents for DocuPrint M355 df













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands