manualshive.com logo in svg

Fuji Xerox DocuPrint M355 df, User Manual

Share
Download
Fuji Xerox DocuPrint M355 df User Manual Download Page 356

356

Troubleshooting

Protrudent/Bumpy Paper

Images Are Skewed

Problem

Action

Printed surface got 
protrudent/bumpy.

Clean up the fusing unit.

1

Load one sheet of paper in the bypass tray, and then print a solid image all over 
paper.

2

Load the printed sheet with the side to be printed on facing down, and then print a 
blank sheet of paper.

If the problem persists, contact the Fuji Xerox local representative office or an 
authorised dealer.

Problem

Action

The printed result are skewed.

Adjust the paper guides properly.
If the problem persists, install the transfer unit according to an appropriate procedure.
Install the transfer unit according to an appropriate procedure.

See also: 

• "Installing a Transfer Unit" on page 393

If the problem persists, contact the Fuji Xerox local representative office or an 
authorised dealer.

Summary of Contents for DocuPrint M355 df













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands