Fuji Xerox DocuPrint M355 df User Manual Download Page 62

Page: 62 / 428

Basic Operation

Align the connector and the three protrusions of the wireless printer adapter with the four holes and insert the
adapter.

NOTE:

•

Ensure that the adapter is fully inserted and secured.

Turn on the printer.
If a message displays telling you to make initial setup on the operator panel, always do as instructed.

Print the System Settings page to confirm the wireless printer adapter is installed correctly.

Press the

(

System

) button.

Select

Report / List

, and then press the

button.

Select

System Settings

, and then press the

button.

The System Settings page is printed.

Confirm that the

Network (Wireless)

section exists.

NOTE:

•

For more information on configuring the wireless printer adapter, see

"Configuring Wireless Settings (Windows & Mac

OS X)" on page 110

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands