Fuji Xerox DocuPrint M355 df, User Manual

Page: 235 / 428

Faxing
235
Receiving a Fax
This section includes:
• "About Receiving Modes" on page 235
• "Loading Paper for Receiving Faxes" on page 235
• "Receiving a Fax Automatically in the FAX Mode" on page 235
• "Receiving a Fax Manually in the TEL Mode" on page 235
• "Receiving a Fax Automatically in the TEL/FAX Mode or Ans/FAX Mode" on page 236
• "Receiving a Fax Manually Using an External Telephone" on page 236
• "Receiving Faxes Using the DRPD Mode" on page 236
• "Receiving Faxes in the Memory" on page 236
• "Polling Receive" on page 237

About Receiving Modes
NOTE:
• To use the TEL/FAX Mode or Ans/FAX Mode, connect an external telephone or answering machine to the phone connector
(
) on the rear of your printer.
When the memory is full, you cannot receive a fax automatically. Use an external telephone to receive a fax
manually.
See also:
• "Receiving a Fax Manually Using an External Telephone" on page 236
 Loading Paper for Receiving Faxes
The instructions for loading paper in the paper tray are the same whether you are printing, faxing, or copying.
See also:
• "Loading Print Media" on page 131
• "Setting Paper Sizes and Types" on page 141
 Receiving a Fax Automatically in the FAX Mode
Your printer is preset to the FAX Mode at the factory.
If you receive a fax, the printer automatically goes into the FAX Mode after a specified period of time and receives
the fax.
To change the interval at which the printer goes into the FAX Mode after receiving an incoming call, see
"Available
Fax Settings Options" on page 246 .
 Receiving a Fax Manually in the TEL Mode
You can receive a fax by picking up the handset of the external telephone and then pressing the remote receive
code (see
"Available Fax Settings Options" on page 246 ), or by setting
OnHook
to
On
(you can hear voice or fax
tones from the remote machine) and then pressing the ( Start ) button.
The printer begins receiving a fax and returns to the standby mode when the reception is completed.