Fuji Xerox DocuPrint M355 df, User Manual

Page: 117 / 428

Printer Connection and Software Installation
117
Operator Panel
Auto SSID Setup
1
Press the ( System ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Network Setup
, and then press the button.
4
Select
Wireless Setup
, and then press the button.
The printer automatically searches the access points on wireless network.
5
Select the desired access point, and then press the button.
If the desired access point does not appear, go to "Manual SSID Setup" on page 117 .
NOTE:
• Some hidden SSID may not be displayed. If the SSID is not detected, turn on SSID broadcast from the router.
6
Enter the WEP key or pass phrase, and then press the button.
The
This Setting Becomes Effective after Restart
message appears.
7
Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
Manual SSID Setup
1
Press the ( System ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Network Setup
, and then press the button.
4
Select
Wireless Setup
, and then press the button.
5
Select
Manual Setup
, and then press the button.
6
Enter the SSID, and then press the button.
7
Select the network mode from
Infrastructure
or
Ad-hoc
depending on your environment, and then press
the button.
When you select
Infrastructure
, proceed to step 8 .
When you select
Ad-hoc
, proceed to step 9 .
8
Select the encryption method from
Mixed mode PSK
,
WPA-PSK-TKIP
,
WPA2-PSK-AES
, or
WEP
, and then
press the button.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Select the desired encryption method.
b
Enter the pass phrase, and then press the button.
The
This Setting Becomes Effective after Restart
message appears.
To use WEP encryption:
a
Select
WEP
for the encryption method, and then press the button.