manualshive.com logo in svg

Fuji Xerox DocuPrint M355 df, User Manual

Share
Download
Fuji Xerox DocuPrint M355 df User Manual Download Page 133

Printing Basics

133

4

Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level 
surface.

5

Load the print media into the tray with the recommended print side facing up.

NOTE: 

•

Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

6

Align the width guides and length guide against the edges of the print media.

7

After confirming that the guides are securely adjusted, insert the tray into the printer.

IMPORTANT: 

•

Do not use excessive force on the tray. Doing so could damage the tray or inside of the printer.

NOTE: 

•

If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.

8

On the operator panel, select the appropriate paper size, and then press the 

 button.

9

Select the appropriate paper type, and then press the 

 button.

Summary of Contents for DocuPrint M355 df













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands