Fuji Xerox DocuPrint M355 df User Manual Download Page 410

Page: 410 / 428

410

Maintenance

Gently lift the printer off the optional 250 sheet feeder, and place it on a level surface.

IMPORTANT:

•

When lifting the machine, make sure to follow the precautions stated in

"Machine Installation" on page 18

Insert the standard 250 sheet tray into the printer, and push until it stops.

IMPORTANT:

•

Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.

Insert the bypass tray into the printer, push until it stops, and close the cover.

Reconnect all cables into the rear of the printer and turn on the printer.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands