Fuji Xerox DocuPrint M355 df User Manual Download Page 296

Page: 296 / 428

296

Using the Operator Panel Menus and Keypad

• Margin Middle

Purpose:

To specify the value of the middle margin.

Values:

Scan Defaults

To modify the defaults for the Scan menu.

NOTE:

•

Values marked by an asterisk (*) are the factory default menu settings.

• File Format

Purpose:

To specify the file format to save the scanned image.

Values:

• Color

Purpose:

To specify whether to scan in color, black and white, or gray scale.

Values:

• Resolution

Purpose:

To specify the default scan resolution.

Values:

For color scan,

400 × 400 dpi

and

600 × 600 dpi

are available only when the optional 512MB memory is installed on the printer.

0 mm

/0.0 inch

Specify the value in increments of 1 mm/0.1 inch.

0 - 50 mm/0.0 - 2.0 inch

PDF

MultiPageTIFF
TIFF
JPEG
XDW

Black & White

Scans in black and white.

Grayscale

Scans in grayscale.

Color

Scans in color.

200

200 dpi

300

300 dpi

400

400 dpi

600

600 dpi

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands