Fuji Xerox DocuPrint M355 df User Manual Download Page 388

Page: 388 / 428

388

Maintenance

Installing a Drum Cartridge

Unpack a new drum cartridge.

Insert the drum cartridge into the cartridge slot, and then push until it stops.

NOTE:

•

The protective cover of the drum comes off while inserting the drum cartridge into the cartridge slot. You do not need to
remove it in advance.

Make sure that the two tabs of the toner cartridge align with the grooves on the printer, and then insert it into the
printer until it clicks.

Grasp the toner cartridge lock lever, and then pull it down until it stops.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands