Fuji Xerox DocuPrint M355 df User Manual Download Page 260

Page: 260 / 428

260

Using the Operator Panel Menus and Keypad

• Collated

Purpose:

To specify whether to sort the job.

Values:

• Output Size

Purpose:

To specify the output paper size for PDF.

Values:

The default paper size is displayed.

• Layout

Purpose:

To specify the output layout.

Values:

PostScript Settings

Use the

PostScript Settings

menu to change printer settings that only affect jobs using the PostScript

emulation printer language.

NOTE:

•

Values marked by an asterisk (*) are the factory default menu settings.

• PS Error Report

Purpose:

To specify whether to print the contents of PostScript errors. The change becomes effective after the printer is turned
off and then on again.

Values:

NOTE:

•

Instructions from the PS driver override the settings specified on the operator panel.

Off

Does not sort the job.

Sorts the job.

A4 (210 x 297 mm)

Letter (8.5 x 11")

Auto

Auto %

100% (No Zoom)
Booklet
2 Pages Up
4 Pages Up

Off

Discards the print job without printing an error message.

On*

Prints an error message before it discards the job.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands