Fuji Xerox DocuPrint M355 df, User Manual

Page: 390 / 428

390
Maintenance

Replacing the Fusing Unit, Transfer Unit and Retard Roll
You need to replace three parts (fusing unit, transfer unit and retard roll) at a time. Both the transfer unit and the
retard roll for replacement come with a new fusing unit.
Fuji Xerox fusing unit, transfer unit, and retard roll are available only through Fuji Xerox. To order by phone, see also
"Online Services" on page 415 .
It is recommended that you use Fuji Xerox fusing unit, transfer unit, and retard roll for your printer. Fuji Xerox does
not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Fuji
Xerox.
This section includes:
• "Removing the Fusing Unit" on page 391
• "Installing a Fusing Unit" on page 392
• "Removing the Transfer Unit" on page 392
• "Installing a Transfer Unit" on page 393
• "Removing the Retard Roll in the Standard 250 Sheet Tray" on page 394
• "Installing a Retard Roll in the Standard 250 Sheet Tray" on page 395
• "Resetting the Counter of the Fusing Unit" on page 395
Overview
When a fusing unit or transfer unit reaches its usable life-span, the following messages appear on the LCD panel.
CAUTION:
• Fusing Unit Safety
When removing the Fusing Unit, always switch off first and wait for 40 minutes until it cools off.
Message Remaining Page Yield Printer Status and Action
Replace Fusing Unit
Soon
Life Almost Over
10,000 pages The fusing unit is near the end of its life. Prepare a
new one.
Replace the fusing unit as well as the transfer unit at
the same time.
Replace Fusing Unit - The fusing unit has reached the end of its life. Replace
the old fusing unit with a new one.
Replace Transfer
Unit
- The transfer unit has reached the end of its life.
Replace the old transfer unit with a new one.