manualshive.com logo in svg

Fuji Xerox DocuPrint CM205 b, User Manual

Share
Download
Fuji Xerox DocuPrint CM205 b User Manual Download Page 372

371

Troubleshooting

Avoiding Jams

•

Use only recommended print media.

•

See 

"Loading Print Media in the Multipurpose Feeder (MPF)" on page 150

 and 

"Loading Print 

Media in the Priority Sheet Inserter (PSI)" on page 157

 to load print media properly.

•

Do not overload the print media sources. Ensure that the stacked print media does not exceed 
the maximum height indicated on the paper width guides.

•

Do not load wrinkled, creased, damp, or curled print media.

•

Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try 
feeding one sheet at a time through the MPF or the PSI.

•

Do not use print media that you have cut or trimmed.

•

Do not mix print media sizes, weights, or types in the same print media source.

•

Ensure that the recommended print side is face up when you insert the print media.

•

Keep print media stored in an acceptable environment.

•

Do not remove the PSI during a print job.

•

Ensure that all cables that connect to the printer are correctly attached.

•

Overtightening the guides may cause jams.

See also: 

• "About Print Media" on page 140

 

• "Supported Print Media" on page 145
• "Print Media Storage Guidelines" on page 144

Summary of Contents for DocuPrint CM205 b
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands