Fuji Xerox DocuPrint CM205 b User Manual Download Page 354

Page: 354 / 471

353

Using the Operator Panel Menus and Keypad

• Margin Middle

Purpose:
To specify the value of the middle margin.
Values:

• TIFF File Format

Purpose:
To specify the TIFF file format.
Values:

• Image Compression

Purpose:
To specify the image compression level.
Values:

• Max E-Mail Size (DocuPrint CM205 f/CM205 fw Only)

Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K
bytes. The default is 2048 K bytes.

Fax Defaults (DocuPrint CM205 f/CM205 fw Only)

Use the

Fax Defaults

menus to configure a variety of fax features.

NOTE:

•

The Fax service cannot be used unless you set up a region code under

Region

. If

Region

is not set up, a

message

Set The Region Code

appears on the LCD panel.

•

Values marked by an asterisk (*) are the factory default menu settings.

0mm*/0.0 inch*

Specify the value in increments of 1 mm/0.1 inch.

0-50mm/0.0-2.0 inch

TIFF V6*
TTN2

Higher

Sets the image compression level to

Higher

Normal*

Sets the image compression level to

Normal

Lower

Sets the image compression level to

Lower

Summary of Contents for DocuPrint CM205 b
























































































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM205 b

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint CM205 b, User Manual

Search results

Summary of Contents for DocuPrint CM205 b

Reviews:

Brands by name

Popular brands