manualshive.com logo in svg

Fuji Xerox DocuPrint CM205 b, User Manual

Share
Download
Fuji Xerox DocuPrint CM205 b User Manual Download Page 329

Using the Operator Panel Menus and Keypad

328

• Protocol

Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and 
then on.
Values:

NOTE: 

•

WSD stands for Web Services on Devices.

• Initialize NVM

Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). After executing this function and 
rebooting the printer, all wired network settings are reset to their default values.
Values:

Fax Settings (DocuPrint CM205 f/CM205 fw Only)

Use the 

Fax Settings

 menu to configure the basic fax settings. 

NOTE: 

•

Values marked by an asterisk (*) are the factory default menu settings.

LPD

Disable

Disables the Line Printer Daemon (LPD) port.

Enable

*

Enables the LPD port.

Port 9100

Disable

Disables the Port 9100 port.

Enable

*

Enables the Port 9100 port.

WSD

Disable

Disables the WSD port.

Enable

*

Enables the WSD port.

SNMP

Disable

Disables the Simple Network Management Protocol (SNMP) 
UDP port.

Enable

*

Enables the SNMP UDP port.

StatusMessenger

Disable

Disables the StatusMessenger feature.

Enable

*

Enables the StatusMessenger feature.

InternetServices

Disable

Disables an access to CentreWare Internet Services 
embedded in the printer.

Enable

*

Enables an access to CentreWare Internet Services 
embedded in the printer.

LLTD

Disable

Disables the LLTD.

Enable*

Enables the LLTD.

Bonjour(mDNS)

Disable

Disables the Bonjour (mDNS).

Enable

*

Enables the Bonjour (mDNS).

Yes

Initializes the wired network data stored in NVM.

No*

Does not initialize the wired network data stored in NVM.

Summary of Contents for DocuPrint CM205 b
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands