Fuji Xerox DocuPrint CM205 b, User Manual

Page: 365 / 471

Using the Operator Panel Menus and Keypad 364
Resetting to Factory Defaults
After executing
Initialize NVM
and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint CM205 f/CM205 fw, to initialize the wired network settings, refer to "Initialize NVM" on
page 328 .
– For the DocuPrint CM205 fw, to initialize the wireless network settings, refer to "Reset Wireless (DocuPrint
CM205 fw Only)" on page 327 .
1
Press the ( System ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Maintenance
, and then press the button.
4
Select
Initialize NVM
, and then press the button.
5
Select
System Section
to initialize the menu parameters, and then press the button.
For the DocuPrint CM205 f/CM205 fw, select
User Fax Section
to initialize the Address Book
data for fax, and select
User Scan Section
to initialize the Address Book data for e-mail.
6
Select
Yes
, and then press the button.
The printer restarts automatically to apply the settings.