Fuji Xerox DocuPrint CM205 b, User Manual

Page: 279 / 471

Faxing (DocuPrint CM205 f/CM205 fw Only) 278
Sending a Delayed Fax
The Delayed Start mode can be used to save scanned documents for transmission at a specified time
to take advantage of lower long distance rates.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 268
• "Loading an Original Document on the Document Glass" on page 269
2
Press the ( Fax ) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 270
• "Lighten/Darken" on page 272
4
Select
Delayed Start
, and then press the button.
5
Select
On
, and then press the button.
6
Enter the start time using the numeric keypad or press the or button to select the start time,
and then press the
button.
7
Select
Fax to
, and then press the button.
8
Select
Keypad
, and then press the button.
9
Enter the number of the remote machine using the numeric keypad, and then press the
button.
You can also use speed dial or group dial numbers.
See also:
• "Automatic Dialing" on page 295
10
Press the ( Start ) button.
Once the Delayed Start mode is activated, your printer stores all the documents to be faxed to its
memory and sends them at the specified time. After faxing in the Delayed Start mode is complete, the
data in the memory is cleared.