manualshive.com logo in svg

Fuji Xerox DocuPrint CM205 b, User Manual

Share
Download
Fuji Xerox DocuPrint CM205 b User Manual Download Page 270

269

Faxing (DocuPrint CM205 f/CM205 fw Only)

Loading an Original Document on the Document Glass

1

Open the document cover.

2

Place the document face down on the document glass and align it with the registration guide on 
the top left corner of the document glass.

3

Adjust the document resolution, referring to 

"Resolution" on page 270

.

4

Close the document cover.

NOTE: 

•

Ensure that no document is in the ADF. If any document is detected in the ADF, it takes priority over the 
document on the document glass. 

•

If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught by the 
stopper and then close the document cover. If the book or magazine is thicker than 20 mm, start faxing with 
the document cover open.

CAUTION:

•

Do not apply excessive force to hold thick document on the document glass. It may break the 
glass and cause injuries.

Summary of Contents for DocuPrint CM205 b
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands