137
M
a
k
ing Cop
ies
B
asi
c
Fe
a
ture
s
Output
For
m
a
t
Adde
d
F
e
atu
res
Ima
g
e Q
u
a
lit
y
St
ore
d
Job T
e
mpl
a
tes
5.23
Inserting Transparency
Separators
When copying on transparencies, this feature allows you to insert a blank sheet of paper of the same size and
orientation between each pair of transparencies as a separator.
To copy on transparencies, load them in tray 5 (bypass) and then select the correct paper type for the
transparencies for copying. Load the paper to be used as separators in one of the trays 1, 2, 3 and 4 in the
same orientation as the transparencies.
Options available for this feature are:
Off
Separators will not be inserted between the transparencies.
On
Separators will be inserted between the transparencies.
Also, you can specify whether or not to copy on the separators.
• When you select Blank Separators, copies will be made with blank separators inserted.
• When you select Printed Separators, copies will be made with separators inserted with the same image
as those of the transparencies.
●
To prevent machine breakdown or paper jam, do not load the transparencies in trays 1, 2, 3, and 4 and the optional trays 6 and
7.
●
To prevent machine breakdown or paper jam, it would be advisable to use paper recommended by our company. For details see
“2.1 Paper to Use”.
●
This feature cannot be combined with the 2-Sided, Covers, Auto (Large Output), Collated, Uncollated Face Down of Output
Orientation, Staple, or Punch options.
●
The separators will not be used for copying and will be output as blank sheets. They will not be counted by the meters.
However, they will be counted when Printed Separators is selected.
●
When the optional tray 6 (HCF) is installed, you can load paper to be used as separators in it.
●
You cannot select the tray 7 for Transparency Separators.
●
When copying on transparencies with separators, you can copy only one set at a time.
Transparency Separators
3
A
B
2
Report
1
3
A
B
2
Report
1
