Fluke 8062A, Instruction Manual

Page: 107 / 124

Accessory Information
Introduction
6
6-3
6-1. Introduction
This chapter of the manual contains information concerning the accessories
available of use with your multimeter. Each accessory, as shown in Figure 6-
1, is described in general terms under a separate major heading containing
the accessory model number. The depth of detail is intended to give the
prospective user an adequate first acquaintance with the features and
capabilities of each accessory. Additional information, when necessary, is
supplied with the accessory.
6-2. Deluxe Carrying Case (C90)
The C90 Deluxe Carrying Case is a pliable, vinyl, zipper-closed pouch that
provides in-field-transport protection for the instrument as well as convenient
storage locations for test leads, operator guide and other small accessories. A
finger- or belt-loop is included on the case as a carrying convenience.
6-3. Temperature Probes (80T-150C and 80T-
150F)
The 80T-150 Temperature Probe coverts the instrument into a direct-reading
(1 mV dc/
°
)
°
C (80T-150C) or F
°
(80T-150F) thermometer. It is ideally
suited for surface, ambient, and liquid measurements and lends itself easily
to a wide range of design, troubleshooting, and evaluation applications. A
rugged, fast-responding probe-tip with a 350V dc standoff makes the 80T-
150 one of the most versatile and easy-to-use temperature probes available.
RANGE (
°
C/
°
F)
80T-150C ........................................
80T-150f ......................................... -50
°
C to +150
°
C
-58
°
F to 302
°
F
ACCURACY.....................................
±
1
°
C (1.8
°
F) from 0
°
C to 100
°
C,
decreasing linearly to
±
3
°
C (5.4
°
F)
at -50
°
C and +150
°
C
VOLTAGE STANDOFF .................. 350V dc or peak ac
POWER............................................. Internal disposable battery; 1,000
hours of continuous use.