Fluke 1586A, User Manual

Page: 115 / 140

Maintenance and Care
Introduction
6
6-3
Introduction
This section supplies information on how to clean the Product, reset the memory, and
replace the fuse in the rear of the Product.
Clean the Product
To clean the Product, wipe the instrument with a cloth that is lightly dampened with
water or mild detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or
methanol based fluids.
Replace the Fuse
The Product has a product fuse that protects from overcurrent. Each voltage selection
requires a specific fuse. See Table 6-1.

Warning
To prevent possible electrical shock, fire, or personal injury,
use only specified replacement parts.
Table 6-1. Fuses
Voltage Selector Fuse Fluke Part Number
100 V 0.25 A, 250 V (slow blow) 166306
120 V 0.25 A, 250 V (slow blow) 166306
220 V 0.125 A, 250 V (slow blow) 166488
240 V 0.125 A, 250 V (slow blow) 166488
To replace the fuses (see Figure 6-1):
1.
Disconnect the mains-power cord from the power-entry module.
2. Open the power entry module and remove the fuse holder.
3. Replace the fuses with exact replacements as listed in Table 6-1.