Flexim FLUXUS F60 Series Operating Instruction Download Page 193

Page: 193 / 244

19 Settings

FLUXUS F60*

19.3 Working with parameter records

193

UMFLUXUS_F60xV5-0EN, 2017-10-16

19.3.2

Loading a parameter record

Stored parameter records can be loaded and used for measurement.

• Select the program branch

Parameter

• Press ENTER.
• Select the channel for which a parameter record is to be loaded.
• Press ENTER.

• Select the parameter record to be loaded.
• Press ENTER.

19.3.3

Deletion of parameter records

• Select

Special Funct.\Delete Para.Rec.

• Press ENTER.
If no parameter record is stored, the message

NO PAR. STORED!

will be displayed.

• Select the parameter record to be deleted.
• Press ENTER.

• Confirm whether the parameter record shall be deleted.
• Press ENTER.

Parameter\for Channel A:

Parameter\for Channel A:\Parameter from:\Par.Record 01

Special Funct.\Delete Para.Rec.

Special Funct.\Delete Para.Rec.\Delete:

Special Funct.\Delete Para.Rec.\Delete:\Really Delete?

Summary of Contents for FLUXUS F60 Series





















































































































































































































































Search results

Summary of Contents for FLUXUS F60 Series

Reviews:

Flexim FLUXUS F60 Series, Operating Instruction, Page: 193 / 244

Search results

Summary of Contents for FLUXUS F60 Series

Reviews: