9 Measurement
FLUXUS F60*
9.4 Displaying measured values
107
UMFLUXUS_F60xV5-0EN, 2017-10-16
AutoMux mode
• All channels
The measured values of all activated channels (measuring and calculation channels)
are displayed consecutively. The display and the measuring process are synchronized.
The channel on which a measurement is being made is displayed in the upper line on
the left.
• Measuring channels only
The measured values of all measuring channels are displayed. The next active measur-
ing channel is selected after min. 1.5 s.
• Calculation channels only
The measured values of all calculation channels are displayed. The next active calcula-
tion channel is selected after min. 1.5 s.
This mode can only be activated if at least 2 calculation channels are active.
HumanMux mode
The measured values of one channel are displayed in the HumanMux mode. The mea-
surement on the other channels is continued, but not displayed.
Press key
to display the next active channel. The measured values for the selected
channel are displayed.
9.4.3
Adjustment of the display
During the measurement, the display can be adapted in order to display 2 measured val-
ues simultaneously (one in each line of the display). This does not affect totalizing, stor-
ing of measured values, transmission of measured values, etc.
The following information can be displayed in the upper line:
display
explanation
BATT=
charge state of the battery
Mass Flow=
designation of the physical quantity
A: +8.879 m³
values of the totalizers, if activated
Tx=
temperatures assigned to the channel and their difference if the temperature
is measured
full=
date and time at which the data logger will be full, if activated
Mode=
measuring mode
L=
transducer distance
Rx=
alarm state indication if activated and if alarm outputs are activated
δ
c=
difference between the measured sound speed and the sound speed of a
selected reference fluid, if activated