83
Draw Mode Options
The TS 44SS/BEV system can be set for three
different draw modes. With the TS 44SS/BEV
system, different draw modes can be set on
separate spouts.
The standard manual draw mode dispenses
flavors as long as the draw handle is open.
Flavor flows through the syrup line when the
draw handle is in the open (dispensing)
position. The flavor continues to flow until the
draw handle is closed. In this mode, the
operator can clear out the remaining flavors in
the spout and reduce carryover in the next
serving by topping off the serving (quickly
opening and closing the spout over the serving)
or dispensing a small amount of plain product
into a cup to dispose of later.
The timed serving size draw
mode eliminates
the need for topping off the serving. Small,
medium, large and extra-large sizes are pre-
programmed to stop the flow of flavor after
product has dispensed for a specific time.
When the serving has reached its size limit,
flavor flow ceases and, shortly after, a beeping
sound alerts the operator to close the draw
handle. The brief time between the flavor shut-
off and the beeping sound allows unflavored
product to clear the remaining flavor through
the Injector / Blending Head, which greatly
reduces carryover issues. This application is
also useful for self-service operations in
maintaining consistent serving
The auto dispense draw mode is exclusively
designed for Frozen Carbonated Beverage
freezers and will not work on a non-FCB
freezer. The FCB freezer also requires a
special Flavor Burst Injector Assembly which is
not included standard with the TS 44SS/BEV
system.
Enabling the Standard Manual Draw Mode
Standard manual draw mode allows the
operator to dispense product with flavor for as
long as the draw handle is in the open position.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Select SPOUT A MAINTENANCE (or
SPOUT B MAINTENANCE if you wish to set
up standard manual draw mode on the
freezer to the right).
3. Select SPOUT A SETUP OPTIONS (or
SPOUT B SETUP OPTIONS).
Summary of Contents for TS 44SS/BEV
