Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 94 / 112

93
9. Draw a serving for each flavor to determine
if the settings are acceptable. Repeat Steps
1-8 to adjust any levels as needed.
Adjusting Alternating Flavor Timing
The TS 44SS/BEV is able to inject more than
one flavor in a single serving with one smooth
drawing motion simply by selecting multiple
flavors from the Touchscreen. Each flavor will
dispense in the order they were selected for a
preset amount of time, creating layers of
different flavors within the serving. When using
the alternating flavor function (i.e. when more
than one flavor is selected for a single serving),
the timing of the changes between flavors can
be adjusted using the Touchscreen. This
allows the operator to adjust for either wider or
narrower layers of flavors in the serving.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press SPOUT A MAINTENANCE (or
SPOUT B MAINTENANCE if adjusting the
flavor timing for product dispensing from
Spout B).
3. Under
“Alternating Selections Dispense
Time”, use the “<” and “>”to increase or
decrease the flow time for each layer. A
higher number increases the time each
flavor is dispensed, creating thicker or wider
layers. A lower number decreases the
timing, creating more narrow layers.
NOTE: TOO LOW OF A SETTING MIGHT
RESULT IN BLENDING THE FLAVORS
RATHER THAN CREATING DISTINCT
LAYERS. TOO HIGH OF A SETTING MIGHT
RESULT IN REACHING YOUR DESIRED
SERVING SIZE BEFORE ALL THE FLAVORS
HAVE CYCLED THROUGH.