Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 89 / 112

88
Setting Serving Size Timing
The TS 44SS/BEV has a program functioned
into the electronics that allows the operator to
have the flavor flow shutoff automatically at a
preset time while drawing a serving. The
operator simply determines the length of time it
takes to draw a desired serving size and then
programs the sizes into the Touchscreen.
Setting the serving size timing is only necessary
when the TS 44SS/BEV system is set to run
based on serving size (see
“Serving Mode
Option
s”).
Ensure that the freezer is set to the desired
product flow rate according to the freezer
manufacturer’s instructions.
1. Using a stop watch, record how long it takes
to draw each serving size according to your
preference (small, medium, large and extra-
large). Start timing from the moment the
draw handle is open fully till fully closed.
2. The Touchscreen should show Small,
Medium, Large and Extra Large keys above
the menu flavors. If not, follow the
instructions in the previous section
“Enabling the Timed Serving Size Draw
Mode.
”
3. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
4. Press the SPOUT A MAINTENANCE key
(or SPOUT B MAINTENANCE if you wish to
set serving times for the freezer to the right).
5. Press the ADJUST SERVING SIZES key.
NOTE: IF THE SERVING TIMES SETUP KEY
IS NOT SHOWING IN THIS MENU, SEE
PREVIOUS SECTION “ENABLING THE TIMED
SERVING SIZE DRAW MODE” AND FOLLOW
STEPS 3, 4, AND 5.
6. Select a size in the first box using the
“<”
and
“>”keys.