Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 82 / 112

81
11. If your soft serve freezer is located to the
left of the frozen beverage freezer, set up
the soft serve freezer as “Spout A” and the
frozen beverage freezer as “Spout B”. On
the “Initial Unit Setup Powered by the
P2
Cable Connector” screen, check the box
under the A column in the “1-4” row. Press
the box to select it. Then, select the box in
the B column in the “5-8” row.
12. If your soft serve freezer is located to the
right of the frozen beverage freezer, set up
the soft serve freezer as “Spout B” and the
frozen beverage freezer as “Spout A”. On
the “Initial Unit Setup Powered by the
P2
Cable Connector” screen, check the box
under the B
column in the “1-4” row. Then,
select the box in th
e A column in the “5-8”
row.
13.
Using the “<” and “>” keys, scroll through
the options in the two “Type of Equipment”
boxes. Select SOFT SERVE FLAVORS for
the first box (1-4), and BEVERAGE
FLAVORS for the second box (5-8).
NOTE: IF EITHER
“BEVERAGE FLAVORS”
OR “SOFT SERVE FLAVORS” IS NOT
APPEARING AS AN OPTION, BE SURE THE
CORRECT BOXES HAVE A CHECK-MARK.
ALSO, MAKE SURE YOU ARE ON THE
CORRECT SCREEN. YOU SHOULD BE ON
THE SCREEN THAT SAYS “POWERED BY
THE
P2 (NOT P3)
CABLE CONNECTOR” AT
THE TOP. IF IT SAYS “P3”, CLEAR OUT THE
CHECKED BOXES, PRESS THE
“BACK”
BUTTON TO RETURN TO THE CORRECT
SCREEN AND REPEAT STEPS 11-12.
14. Press DONE to return to the main screen.