Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 65 / 112

64
3. If using the Bracket, assemble the Bracket
and the Switch using the appropriate
pieces. If both bracket plates are used,
ensure the lock washer is installed between
them. Use some of the adhesive included
to attach the Switch to the Bracket.
4. Attach a moderate portion of the adhesive
to the side of the Switch or Bracket that will
be secured to the freezer face.
5. Clean, rinse and dry the area of the freezer
to which the Switch or Bracket will be
attached using detergent, water, and single
service towels.
6. Remove the other side of the protective
backing from the adhesive strip and attach
the Switch or Bracket Assembly to the
appropriate position on the freezer.
7.
Locate the Touchscreen stereo plug “A” if
the frozen beverage freezer is to the left of
the soft serve freezer, or stereo plug “B” if
the frozen beverage freezer is to the right.
Connect the plug to the Spigot Switch jack
and ensure the connection is fully engaged.
8. Use the switch extension included if you
need to add more length to one of the
switch cables.
NOTE: CABLE CLIPS MAY BE USED TO
SECURE THESE CABLES SO THAT THEY
DO NOT INTERFERE WITH THE OPERATING
PARTS ON THE FRONT OF THE FREEZER.