Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 37 / 112

36
5. When the Drive Assembly Gear Box has
soaked for at least 5 minutes, brush and
clean all exposed surfaces and openings
with detergent water and rinse thoroughly.
The Suspension Bracket may be
disassembled for a more thorough cleaning
if necessary.
NOTE:
UNDER NORMAL OPERATING
CONDITIONS, IT IS NOT ADVISORY TO
BRUSH OTHER AREAS INSIDE THE DRIVE
ASSEMBLY GEAR BOX. DOING SO MAY
CAUSE DAMAGE.
NOTE: DO NOT OPEN OR DISASSEMBLE
THE DRIVE ASSEMBLY GEAR BOX.
6. Place the Gear Box, Suspension Bracket,
Gear Cartridge, and Injector / Blending
Head in approved sanitizer solution and
soak for at least 1 minute.
7. Remove each part from the sanitizer
solution. Place the items on a sanitary tray
to air dry.
8. Spray the Syrup Line Manifold opening with
approved sanitizer solution. Allow it to
sanitize for at least 1 minute.
9. Dry the end of the manifold with a clean
single service towel.
10. Install the cap on the manifold.
11. Clean, rinse and dry the surfaces of the
Drive Motor, the Touchscreen, and exposed
surfaces of the cabinet using detergent
water, clean water, and single service
towels.